Making Your Own Replacement Key For Saab 93 Viggen
Saab owners who lose a key might be concerned about the cost and hassle of replacing it. There is a way to cut down on these costs by creating your own key fob.
You will require a phillips screwdriver with a flat head to do this. Put the flathead screwdriver into the slot in the middle of the case, and slowly open it.
Cost
Some used cars have only one key, but most SAABs come with two keys. In this case, the owner will have to purchase new keys. This can be costly. There are a variety of ways to save money during this procedure. For instance, if only require a replacement for your key fob case and you want to save money by buying used cases from a dealership. These cases do not contain the emergency badge or key, and are prone to wear out quickly.
In addition to the cost of a new key, you'll also have to pay for the installation and programming of the TWICE module. These costs can add up quickly particularly if you do not have an extra.
For this reason, it is crucial to have two keys to your car. This way, in the event that you lose the only key that works you won't be left without any transportation.
The good news is that adding a second key to your Saab 9-3's keypad isn't as difficult as it may seem. The Keylab is that you must connect the key to the computer in your car. This can be done through an authorized dealer, but it can take some time to set up an appointment. Luckily, you can find the information you require on the internet to aid you in the procedure.
Installation
Most Saab vehicles built after 1995 have an immobilizer system that makes use of an electronic key fob to control the car's engine. This system also controls the door locks and remote functions for the car. It is crucial to have a spare key available to prevent losing the original and causing your car to be stolen. If you lose your only Saab working key, there are numerous options to replace it without spending a fortune on dealer services.
First, you must prepare the new keyfob. You can do this by using a flathead screwdriver to pry the case open. Inject the screwdriver into a tiny slot that is located in the center of the case and gently move the screwdriver. If you're having trouble, try using different angles. After you've opened the case, you're able to take out the electronics and place them in a new fob case.
Once you have the replacement fob as well as the key, you can begin the programing process. It is necessary to connect your Tech2 to the computer and follow the steps for NG 9-3 using or without a transponder. It is advised to get a replacement device TWICE, which is connected to the correct transponder and key. You can find an equivalent unit on the internet however, you must make sure that the replacement is an OEM part.
Programming
A Tech 2 is required to add an additional key to the Saab 9-3. It also requires programming the vehicle to recognize the new keys. This is a more complicated process than simply copying a key made of metal. It should be handled by a professional in order to not harm the electronic system of the vehicle. It is recommended to include a spare car key as soon as you can. If you wait, you could end up paying more costs in the future.
You'll also have to replace either the TWICE or CIM modules. It's a postal process and cannot be do through an aftermarket supplier. Depending on the model of your car, the cost can be quite high.
The dealer will charge you the most dollars to replace your car computer, but there's a different option! S.A. Locksmith & Security can reprogram the EEPROM of your Saab computer and prepare the vehicle for the new key, saving you the cost of a brand new car computer! This service is quick, easy and affordable. You will save up to 50% of what dealers would charge you. This is an excellent solution for those who have lost their keys.
Remotes
The Saab 9-3 Viggen is one of the most unique vehicles ever to wear the Saab badge. It was a Scandinavian, front-drive, fighter jet-inspired beast that was fast and fun to drive. Many other Saab models were released, but none were as eccentric.
If you have a 9-3 Saab and lose the key fob it is crucial to replace it as fast as possible. Saab vehicles have an immobilizer device that requires a special key in order to start. The process of replacing the key is simple if you have a spare key, but it can be expensive and time-consuming if you don't have an extra.
You can save money if purchase a used key fob replacement and have it programmed locally by locksmiths. You should be cautious when buying used keys from eBay and other online outlets. They may not be authentic and you could end up paying more in the end.
Removing the electronics and battery from the old key fob is a simple procedure that anyone can perform with a small flathead screwdriver. Be careful not to cause damage to the small electronic components inside the case. Be careful not to pour liquids into the case since this could cause damage. You should also avoid purchasing cloned keys from second-hand sellers, since they may not have been paired with the CIM of your car.